CDL Permit Test Questions: What Texas Actually Tests in 2026

A CDL applicant studies the Texas commercial driver handbook on a tailgate at sunset, with a semi truck parked behind

Searching for cdl permit test questions? For Texas applicants, the key is knowing which knowledge exams apply and the order DPS gives them. This guide explains what each test covers and how to prepare from the official handbook, not by memorizing leaked or unofficial questions.

The Texas Commercial Motor Vehicle Drivers Handbook (DL-7C) is the place to study the rules. For a separate overview of practice strategies, see our Texas CDL permit practice test guide.

The Texas CDL knowledge exam order

Texas DPS administers the knowledge exams in this order:

  1. Texas Commercial Rules
  2. General Knowledge
  3. Combination Vehicles, for Class A applicants
  4. Air Brakes, if applicable
  5. Endorsements

The tests you need depend on your license class, vehicle and endorsements. Follow the order DPS uses when you plan your study: earlier topics provide a foundation for later ones. Check the current DPS CDL application instructions and handbook for your specific requirements. DPS and the current handbook are the sources to confirm exam length, question counts and passing standards; don’t rely on old numbers or unofficial claims.

CDL applicant reviewing a commercial vehicle handbook and handwritten notes

What each section is really testing

1. Texas Commercial Rules

This section covers Texas-specific commercial vehicle rules and state requirements. Read it alongside, not instead of, the general handbook material. Pay attention to requirements that apply in Texas and to how state licensing procedures fit with the broader commercial driving rules.

2. General Knowledge

The cdl general knowledge test covers shared knowledge every CDL applicant needs. It’s broad, so break it into topics rather than treating the entire handbook as one assignment. Review:

  • Safe driving, shifting, vehicle control and seeing hazards ahead
  • Vehicle inspection basics and recognizing safety concerns
  • Cargo, load balance and securement
  • Hours-of-service basics and fatigue awareness
  • Crash procedures and emergency response
  • Railroad crossings, changing road conditions and communication with other road users

For a deeper study roadmap, use our complete CDL permit test study guide.

3. Combination Vehicles, Class A only

This section focuses on operating a tractor-trailer combination. Study coupling and uncoupling, trailer air lines, and how a combination handles differently from a single vehicle. Understand pivot points and off-tracking: the trailer’s wheels may follow a different path from the tractor’s. Review rearward amplification (the way movement can increase toward the back of a combination) and why a high center of gravity raises rollover risk.

4. Air Brakes, if applicable

If the vehicle you plan to operate has air brakes, study the separate Air Brake material. Topics include dual air systems, gauges, low-pressure warning devices and the brake tests drivers need to know. “If applicable” matters: if you skip the test when it applies to your goal, a restriction may remain on your license. Confirm which tests match the vehicle you intend to drive.

5. Endorsements: last

Endorsement tests cover specialized driving responsibilities. Depending on your goals, you may need to study:

  • H: Hazardous materials
  • N: Tank vehicles
  • P: Passenger
  • S: School bus
  • T: Doubles/triples
  • X: Combined hazardous materials and tank vehicle

An endorsement is not a substitute for the core exams. Confirm the right test and any related training requirements with DPS before you apply.

Start with your CDL class and application steps

Your vehicle and work plans help determine which license class and exams to pursue. In general:

  • Class A: A combination with a gross combination weight rating (GCWR) of 26,001 pounds or more, when the towed unit is over 10,000 pounds.
  • Class B: A single vehicle with a gross vehicle weight rating (GVWR) of 26,001 pounds or more; a vehicle towing under 10,000 pounds; or a vehicle designed for 24 or more passengers.
  • Class C: A vehicle designed for 16 to 23 passengers, or one transporting placarded hazardous materials as described under 49 CFR Part 172, Subpart F.

A CLP is required for first-time CDL applicants, upgrades, and applicants adding Passenger or School Bus endorsements. Texas requires you to hold the CLP for at least 14 days before the skills exams. It is valid for 180 days or until your Texas driver license expires, whichever comes first. It can be renewed once, up to 30 days before it expires, without retaking the knowledge exams.

DPS’s CLP application steps include a valid Texas driver license; evidence of U.S. citizenship or lawful presence; identity and Social Security Number; and medical-status self-certification using form CDL-4, CDL-5 or CDL-10. Depending on your self-certification, you may also need a Medical Examiner’s Certificate, valid for up to 24 months. New residents may need vehicle registration and insurance evidence. After the CDL-1 application and appointment, expect to pay the fee, provide thumbprints and a photo, complete a vision exam, and take the applicable knowledge tests. Check the current DPS application page before you go.

CDL applicant speaking with staff at a public licensing office counter

Plan around the English-only knowledge exams

Since June 1, 2026, all Texas CDL knowledge exams are English only; Spanish versions are no longer offered. Skills tests (vehicle inspection, basic control and road test) also continue in English.

Federal regulation 49 CFR 391.11(b)(2) requires drivers to read and speak English well enough to converse with the public, understand highway signs and signals, and respond to official inquiries. Review unfamiliar terms as you study instead of waiting until test day.

A practical way to study each section

For every applicable topic in the handbook, use the same four-step routine:

  1. Read once for orientation. Get the main idea and note headings or terms you don’t understand.
  2. Write notes in your own words. Summarize the rule rather than copying sentences.
  3. Try review questions without looking. Recall what you learned before checking the source.
  4. Re-read only what you missed. Find the relevant handbook section and correct your notes.

Recall practice, trying to retrieve a rule from memory, usually reveals gaps more clearly than repeatedly re-reading pages. Avoid memorizing answer letters. The goal is to understand the safety rule behind a response.

A one-week study plan

Adjust the pace to your schedule; this is a planning outline, not a required number of study hours.

  • Day 1: Confirm your CDL class, vehicle and endorsement goals. Start with Texas Commercial Rules.
  • Day 2: Study General Knowledge topics on vehicle basics, inspection and control.
  • Day 3: Continue General Knowledge with hazards, road conditions and safe driving.
  • Day 4: Review cargo, hours-of-service basics, railroad crossings and crash procedures.
  • Day 5: Study Combination Vehicles if you’re pursuing Class A; otherwise review missed general topics.
  • Day 6: Study Air Brakes if applicable, then the endorsement material you need.
  • Day 7: Review your notes in exam order. Revisit missed handbook topics and confirm test-day requirements with DPS.

Where ELDT theory fits

ELDT is not required before you get a CLP. It is required before the skills test/CDL for first-time CDL applicants, Class B-to-Class A upgrades, and applicants adding new H, P or S endorsements. DPS checks ELDT completion in the Training Provider Registry (TPR). Texas has no separate state ELDT rule; DPS administers licensing and testing, while TDLR is not the CDL licensing authority.

Class A ELDT theory is arranged in five modules and 30 units. The 31-hour figure is a study-planning estimate only, not a federal seat-time rule. There is no federal minimum number of instruction hours for ELDT theory.

  • Basic Operation
  • Safe Operating Procedures
  • Advanced Operating Practices
  • Vehicle Systems and Reporting Malfunctions
  • Non-Driving Activities

Theory can be completed 100% online with a TPR-listed provider. Required behind-the-wheel training is separate and in person. At CDL Compliance Now, students are held to an 80% proficiency standard, and successful completion dates are submitted to the TPR within 2 business days. Our course materials are available through the materials page; they are course study materials, not an official DPS practice test or question bank. There is no streaming video students need to depend on to keep studying, so they don’t have to worry about a video freezing or failing. Workbook purchasers can also request a one-on-one Zoom session with a certified trainer with years of trucking industry experience.

For more on the process from theory through testing, read how to get a CDL permit in 2026. You can also visit CDL Compliance Now or our online ELDT theory site.

Common reasons applicants get stalled

  • Studying the whole handbook as one block instead of following the exam order.
  • Memorizing answer letters rather than learning the rules.
  • Forgetting that Air Brakes is a separate test when it applies.
  • Assuming ELDT must be done before the CLP; it does not.
  • Arriving without the right medical-status self-certification form.
  • Assuming every CDL class or endorsement has the same test requirements.

FAQs about Texas CDL permit test questions

What does the Texas CDL permit test cover?

The knowledge exams cover Texas Commercial Rules, General Knowledge, Combination Vehicles for Class A, Air Brakes if applicable, and relevant endorsements. Use the current handbook to see what applies to your license goal.

What order are the Texas CDL knowledge tests in?

DPS lists Texas Commercial Rules first, followed by General Knowledge, Combination for Class A, Air Brakes if applicable, and Endorsements.

How many questions are on the Texas CDL knowledge exam?

Check with DPS and the current Texas handbook for current exam-length details. Do not rely on an unofficial question count.

Do I need ELDT before getting a Texas CLP?

No. ELDT is not required before getting a CLP. For covered applicants, the required training must be completed before the applicable skills test/CDL, and DPS checks the TPR.

Is the Texas CDL knowledge test available in Spanish?

No. Since June 1, 2026, Texas CDL knowledge exams are English only.

Prepare from the current Texas handbook, follow the order of tests that applies to you, and confirm your documents and requirements with Texas DPS.

To study for the exams online, you can review all our ELDT theory courses and what each one covers.

A CDL applicant leaves a Texas driver license office with a folder of documents and a commercial driver handbook

Disclaimer: CDL Compliance Now provides online ELDT theory only. This course is not a CDL or CLP. Behind-the-wheel training is separate and in person. This is not an official DPS or FMCSA practice test.