Advanced Operating Practices (Module A1.3): Hazard Perception, Skids, and Railroad Crossings

Module A1.3 helps prepare Class A trainees to recognize road hazards and understand how to respond when conditions turn dangerous. It covers work zones, skids and emergencies, and railroad-highway grade crossings.
This is the third post in our four-part series on the Class A theory curriculum. Earlier posts covered Modules A1.1, Basic Operation, and A1.2, Safe Operating Procedures. This post focuses on Module A1.3, Advanced Operating Practices, and what each of its three units covers.
Where Module A1.3 fits in Class A ELDT
The federal Class A curriculum in 49 CFR Part 380, Appendix A has five theory modules and 30 units, from A1.1.1 through A1.5.10. Here’s a brief overview:
Module 1: A1.1 Basic Operation
- Units A1.1.1–A1.1.7: seven units covering foundational vehicle operation.
- About 7 hours is a planning estimate of content, not a federal requirement.
Module 2: A1.2 Safe Operating Procedures
- Units A1.2.1–A1.2.7: seven units covering safe driving practices and conditions.
- About 7 hours is a planning estimate of content, not a federal requirement.
Module 3: A1.3 Advanced Operating Practices
- Units A1.3.1–A1.3.3: three units on hazard perception, skids and emergencies, and railroad crossings.
- About 5 hours is a planning estimate of content, not a federal requirement.
Module 4: A1.4 Vehicle Systems and Reporting Malfunctions
- Units A1.4.1–A1.4.3: three units covering vehicle systems, roadside inspections, and maintenance.
- About 5 hours is a planning estimate of content, not a federal requirement.
Module 5: A1.5 Non-Driving Activities
- Units A1.5.1–A1.5.10: ten units covering important responsibilities beyond driving.
- About 7 hours is a planning estimate of content, not a federal requirement.
The commonly cited total of about 31 hours is also only a planning estimate of content. Federal ELDT requirements set the curriculum and proficiency standard, not a minimum number of training hours. There is no federal minimum number of hours for theory or behind-the-wheel training. Providers still have to cover the required curriculum.
The three units in Module A1.3
The ELDT curriculum summary PDF provides a concise overview of the topics. Module A1.3 is made up of:
A1.3 Advanced Operating Practices
- A1.3.1 Hazard Perception
- A1.3.2 Skid Control/Recovery, Jackknifing, and Other Emergencies
- A1.3.3 Railroad-Highway Grade Crossings
The module introduces advanced operating practices after the fundamental skills covered in the earlier modules. Its core idea is simple: notice potential danger, consider how it could affect the truck, and learn appropriate ways to respond.
Hazard Perception (A1.3.1) teaches trainees to recognize threats in the driving environment and make appropriate adjustments. That includes visual search and surveillance, identifying risky road conditions or other road users, and responding to possible emergency situations. It also covers safety procedures and potential dangers in construction and work zones.

In a work zone, conditions can change quickly. Traffic may shift into a temporary lane, workers may be nearby, and other drivers may brake or merge with little warning. The unit focuses on noticing these potential hazards and understanding why early awareness matters.
Skid Control/Recovery, Jackknifing, and Other Emergencies (A1.3.2) covers causes of skidding and jackknifing, ways to avoid them, and recovery concepts. Trainees study maintaining directional control and bringing a vehicle to a stop on slippery surfaces. The unit also addresses emergency response topics such as evasive steering, emergency braking, off-road recovery, brake failure, tire blowouts, hydroplaning, and rollovers. Unsafe actions that can create or worsen hazards are part of the instruction, too.

This is theory training, not a substitute for hands-on practice or instructor guidance. A trainee should learn the concepts through the provider’s curriculum and follow applicable procedures and professional instruction when operating a vehicle.
Railroad-Highway Grade Crossings (A1.3.3) addresses potential dangers and safe procedures at crossings. Topics include crossing environments, obstructed views, clearance around tracks, railroad signs and signals, and applicable federal and state regulations. Trainees also learn about Emergency Notification Systems for reporting unsafe crossing conditions, disabled vehicles, or obstructions on the tracks.

A key concept is to understand the space and clearance a truck needs around tracks. The curriculum also explains how crossing signals and signs provide safety information, and why trainees should know where to find crossing emergency contact information.
Online theory comes before in-person driving
For eligible Class A trainees, theory can be completed 100% online with a provider listed on the FMCSA Training Provider Registry (TPR). The sequence is online before behind-the-wheel: complete theory first, then complete applicable behind-the-wheel training in person.
Trainees must score at least 80% on the provider’s theory assessment to meet the proficiency standard. Completing the theory course does not guarantee that someone will pass a state CDL knowledge or skills test. A CDL permit practice test can be one way to review knowledge-test topics, but it does not replace the required ELDT curriculum or state testing.
Although this post focuses on Class A training, requirements vary by license and endorsement. People researching a Class B CDL or an endorsement should check the applicable curriculum and confirm what applies to their situation.
Frequently asked questions
What does Module A1.3 cover?
It covers hazard perception, skid control and recovery, jackknifing and other emergencies, and railroad-highway grade crossings.
How many units are in Module A1.3?
There are three: A1.3.1, A1.3.2, and A1.3.3.
Is there a federal minimum number of ELDT theory hours?
No. Federal rules require the curriculum to be covered and trainees to meet the proficiency standard, but set no minimum theory or behind-the-wheel hours.
Can I complete Class A theory online?
Yes. Theory may be completed online with a provider listed on the TPR. Applicable behind-the-wheel training must be completed in person.
What score do I need on the theory assessment?
Trainees must earn at least 80% on the provider’s theory assessment.
When is ELDT completion reported to the TPR?
The provider must submit completion no later than midnight of the second business day after the trainee completes training.
Start your theory training
Ready to take the next step toward your Class A CDL? CDL Compliance Now offers flexible CDL online theory training to help trainees work through the required curriculum. After a student earns a certificate of completion, CDL Compliance Now submits the TPR date within two business days. Begin online, complete your theory assessment, and arrange applicable in-person behind-the-wheel training for the next stage.
You can see how the Advanced Operating Practices module is taught, unit by unit.
